NCT-100-S Multi-function cable tester

Features

Power on calibration: removes circuit errors due to ambient temperature and humidity.
OOK audio hunt technology: It has strong anti interference ability in complex environment.
Line sequence measurement: Accurately draw a line sequence diagram to detect open shorts.
Cable identification: Accurate measurement of the ID adapter, with 16 ID adapters.
Cable diagnosis: TDR measurement technology, high precision, high resolution, open circuit short-circuit fault location, ultra-long distance cable measurement, support for twisted-pair cable coaxial copper telephone line.
Loop Resistance Measurement: Accurately measure cable resistance with resolution as low as 1 ohm.
System settings: sound backlight setting, English Chinese switching, device information viewing.

Cable diagnosis	Twisted pair: UTP、FTP、STP Coaxial: 75Ω,50Ω,93Ω PSTN: pure copper cable Range: 0.1 meter to 450 meters Resolution: 0.1 meter Typical tolerance: ±1% or 0.2 meter Calibration: calibration cable must longer than 20 meters.
Audio tracker	Three tones avialiable, output level is 5Vp-p
Cable ID	Support up to 16 RA-30 IDs
Wiremap	Draw map time is less than 1s
Loop resistance	Range: 0~1800ohm, tolerance is less than 1%
Language	English/Chinese

Ports	RJ-45 x1，RJ-11 x 1
Interface	2.0” LCD ,128×64 pixels； LED x1；Keys ×5
Weight	100g
Port	RJ-45 x 1
Interface	LED x 2
Weight	85g
Environment	Work environment -10~+40 ℃ Storage environment -20~+60℃ Work humidity 95% RH（no condensation）
Power	2 x AA alkaline or 2 x AA NiCd/NiMH batteries

NCT-100 × 1

CT-100 × 1
RA-30 × 4（ID1~ID4）

RJ-45 switching cable × 1
RJ-11 switching cable× 1

RJ45-alligator clip cable× 1 (connected to 4/5 pairs，correspond to positive and negative of Coaxial cable)

Operating Manual / Warranty Card × 1

There are no reviews yet.

Be the first to review “NCT-100-S Multi-function cable tester”

You must be logged in to post a review.