Multimedia over Coaxial (MoCA) technology is designed with advanced modulation technology to increase the trasmission and the receiving speeds of Ethernet packets to reach 2.5 Gbps Ethernet with the new MoCA 2.5 technology.
The operating frequency can be programmed to avoid conflict agaist Digital Video Broadcasting (DVB) signals, so that both video and data content can be multiplexed to deliver triple-play service over single coaxial cable.
❖ Boost the speed and performance of home networking to reach up to 2.5 Gbps Ethernet ❖ Configurable high-frequency modulation (1.1GHz to 1.6GHz) allows Cable TV (DOCSIS 3.0/3.1), Satellite TV or other TV signal overlay without interference ❖ Turn any coaxial outlet to high-speed Ethernet / IP connection for high-definition video streaming, and high-speed Internet ❖ Supplement and extend the existing Wi-Fi network with high-speed wired connection over in-home coaxial drops ❖ Enable tablets, smart phones, gaming APPs/consoles and 4K/8K HDTV to access content simultaneously ❖ Work over the existing home coaxial wirings without re-wiring of Ethernet cables ❖ Plug-and-play installation to deliver both high-definition TV content and high-speed data to every room inside home ❖ Enhance Wi-Fi network over coaxial wirings to reach wired speed and coverage reliability to offload Wi-Fi gateway/router for content transfer between smart devices ❖ Support IPv4 / IPv6, TR069, DHCP and console configuration ❖ Up to 16 MoCA devices can be connected to build meshed Home Network over coaxial cabling in house
MN Series
MN2525 MoCA 2.5 Adapter, 1 x 1000Base-T, 75Ω F MoCA (1.1 to 1.6GHz), 75Ω F CATV (5MHz to 1.2GHz).2.0 Gbps line rate, 50dBmV output, -20dBmV minimum input.
MN2550 MoCA 2.5 Adapter, 2 x 1000Base-T, 75Ω F MoCA (1.1 to 1.6GHz), 75Ω F CATV (5MHz to 1.2GHz).2.5 Gbps line rate, 50dBmV output, -20dBmV minimum input.
Applications-MoCA Home Networking
Home networking over coaxial cable has been well improved to reach up to 2.5 Gbps Ethernet with the new generation of MoCA technology. By connecting to a MoCA adapter, any coaxial outlet can be turned into a high-speed Ethernet / IP interface to deliver high-speed Internet data to any room inside the house or apartment. Wi-Fi coverage in wired Internet speed can also be extended to supplement the existing Wi-Fi network and offload the broadband gateway.
Plug-and-play installation without re-wiring the Ethernet cables allows tablets, smart phones, gaming consoles and HD TVs to access data and video content simultaneously. Up to 16 MoCA adapters can be connected inside the house to build Home Network over the existing coaxial cable wirings. One of the MoCA adapters can connect to the home modem or router installed by Internet Service Provider for general Internet access.
Connecting the First Adapter ① Locate the coaxial outlet in home desired to place the Adapter. If Web browsing is needed, locate the coaxial outlet nears the home modem or router provided by Internet Service Provider Unplug the end of the coaxial cable connected to the TV set or setup box from its coaxial wall outlet. If no TV set or setup box is plugged into this coaxial outlet, skip to step 3. ② Connect the end of the coaxial cable removed in step 1 into the coaxial port labeled CATV on the side of the Adapter. ③ Connect one end of another coaxial cable into the coaxial port labeled COM on the side of the Adapter. ④ Connect the other end of the coaxial cable installed in step 3 to the wall outlet left unconnected in step 1. ⑤ Connect one end of an Ethernet cable into the ETHERNET port on the side of the Adapter. ⑥ Connect the other end of the Ethernet cable into the Ethernet port of home modem or router if Web browsing is needed. Or connect the other end of the Ethernet Cable into the Ethernet port of the device to connect to Internet. ⑦ Plug in the provided power adapter into the power port on the side of the Adapter. Plug the other end of the power adapter into an electrical outlet or power supply.
Connecting Additional Adapters ① Locate the coaxial outlet in home desired to place the Adapter. Unplug the end of the coaxial cable connected to the TV set or setup box from its coaxial wall outlet. If no TV set or setup box is plugged into this coaxial outlet, skip to step 3. ② Connect the end of the coaxial cable removed in step 1 into the coaxial port labeled CATV on the side of the Adapter. ③ Connect one end of another coaxial cable into the coaxial port labeled COM on the side of the Adapter. ④ Connect the other end of the coaxial cable installed in step 3 to the wall outlet left unconnected in step 1. ⑤ Connect one end of an Ethernet cable into the ETHERNET port on the side of the Adapter. ⑥ Connect the other end of the Ethernet cable into the Ethernet port of the device to be connected to Internet. ⑦ Plug in the provided power adapter into the power port on the side of the Adapter. Plug the other end of the power adapter into an electrical outlet or power supply.
Reviews
There are no reviews yet.